No Power On Gateway PC

Date:

Share post:

After a winter storm, we had a power outage that lasted almost 20 hours. Not good in an apartment with only electric heat. No lights, no heat, can’t go online to complain to anyone. 🙂

I previously wrote about someone’s computer not turning on after a power outage. The fix was to unplug the computer, hold down the power button for 30 seconds, plug it back in, and turn it on. They called again after the latest outage. That procedure wasn’t working anymore, and their computer would not power up.

Desktop Doesn’t Power Up After Outage

I tried different cords and power outlets. I have a bunch of old power supplies and found one that was compatible with this system. Without removing the old power supply from the case, I removed the plugins from the motherboard and plugged in this possible replacement.

The system powered up, so I removed the non-working unit and replaced it with the working one. Their computer is up and running again.

I have an older Gateway tower that I use for backup purposes, and when I went to turn it on, it wouldn’t power up.

I thought I would have to replace this one as well until I remembered what happened. Some power supplies have little switches on them. The one in my client’s computer didn’t have a switch, but my Gateway does, and I remember now turning it off on purpose. Before the power outage, the power started blinking on and off until it eventually stayed off.

Even though I didn’t have my Gateway on at the time, every time the power came on, the computer would power up. I was concerned about possible damage to the system, and it was getting annoying. I flipped the switch.

Now that the power has been restored, I have one more thing to do. I’m going into the BIOS and changing that automatic power-on setting.

I went into the BIOS settings by pressing the “delete” key during the boot up. Went into the “Power” setting and found the “Restore On AC Power Loss”.

gateway-bios-restore-on-ac-power-loss-settings

It was set to “Last State”. I changed it to “Off”.

gateway-bios-restore-on-ac-power-loss-off-on-last-stategateway-bios-restore-on-ac-power-loss-off-on-last-state

Remember to “Save & Exit Setup” or “F10” and confirm, “Yes”. Hopefully, that will do it.

One final note: As I was writing this, the power blinked off yet again, despite the relatively decent weather outside. The good news is that my Gateway didn’t come on. Neither did my CyberPowerPC, but my Asus did. Anyway….

For more power-related articles, click here. 

Source link

spot_img

Related articles

A new campaign by the ForumTroll APT group

Introduction In March 2025, we discovered Operation ForumTroll, a series of sophisticated cyberattacks exploiting the CVE-2025-2783 vulnerability in Google...

How To Increase Event Platform Adoption Rates

Your brand went through the time and expense to set up a unique event platform; Whether it’s a...

Terrifying New Photos Emerge From the Jeffrey Epstein Estate

A New York Times spokesperson told WIRED in a statement that Brooks “regularly attends events to speak with...